|
EN
|
|
|
|
 
 print this page     send this page via email
Download Area
PDF Files
 
Flow control valves

 
MRP / MVR
These cartridge flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 200 l/min.
MVRPLSA
Leak-free, load-compensated proportional flow-control cartridges. The ingenious principle makes it possible to combine several functions in one valve. Firstly, the leak-free nature of the main and control functions and secondly, the integral pressure-compensator function for responsive, controlled and load-independent lowering.
MTCA
These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The two part-flows can be pressurized independently of each other. With integral pressure relief function.
MTKA
These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The surplus flow can be pressurized and can therefore be routed to an additional actuator.
MTKK / MTKL
These stack-mounting flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Type MTKL can be used in Load Sensing systems.
MTQA
These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The surplus flow must be routed directly to tank. With integral pressure relief function.
SMA / SMB
These stack-mounting flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 40 l/min.
SRCA
2- and 3-Way Flow Control Valves. Load-sensing capable. Inlet flow up to 100 l/min.
SRCB
These cartridge flow-control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 100 l/min.
SRR
The flow-control valves in this series are used to set the working speed of motors and cylinders, the setting being load-independent, i.e. pressure compensated. The valves can be used as either 2-way or 3-way flow controls.