Flow Control Valves

MRP / MVR

These cartridge flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 200 l/min.

MVRPLSA

Leak-free, load-compensated proportional flow-control cartridges. The ingenious principle makes it possible to combine several functions in one valve. Firstly, the leak-free nature of the main and control functions and secondly, the integral pressure-compensator function for responsive, controlled and load-independent lowering.

MTCA

These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The two part-flows can be pressurized independently of each other. With integral pressure relief function.

MTKA

These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The surplus flow can be pressurized and can therefore be routed to an additional actuator.

MTKK / MTKL

These stack-mounting flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Type MTKL can be used in Load Sensing systems.

MTQA

These valves provide pressure-independent division of a flow of oil into a constant flow and a surplus flow. The surplus flow must be routed directly to tank. With integral pressure relief function.

LVM

Series LVM… flow-control valves are used to set the speed of single-acting hydraulic actuators.

SMA / SMB

These stack-mounting flow control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 40 l/min.

SRCA

2- and 3-Way Flow Control Valves. Load-sensing capable. Inlet flow up to 60 l/min.

SRCB

These cartridge flow-control valves provide pressure- independent division of a flow of oil into a constant flow and a surplus flow. Inlet flow maximum 100 l/min.

SRR

The flow-control valves in this series are used to set the working speed of motors and cylinders, the setting being load-independent, i.e. pressure compensated. The valves can be used as either 2-way or 3-way flow controls.