Amplifier and Control Cards

Programmable Electronic Control Unit EBH-08

  • Single/Dual microcontroller
  • Flexible hardware configuration
  • C/C++ programmable
  • 8 PWMi up to 3 A, up to 300 Hz
  • 2 CAN BUS Port, (opto isolation as option)
  • Up to HW category 2
  • MTTFd = 72 years
Supply Enclosure prot.
Data sheet
8…30 V DC IP67 EBH_200-FL-991634-en

Proportional Amplifier ESSK 103

  • 1-channel for proportional valves  with one solenoid 
  • With one control signal input andone power output
Supply Set value Output Adjustment Data sheet Data sheet
12…30 V DC 0…5 V 500…2500 mA I min, I max ESSK103_100-P-700004-en ExSK103_100-P-700064-en

Proportional Amplifier EBM-300308-DS-MOBI

  • Can control 3 directional valves (6 proportional solenoids)
  • Can be used with various demand signals
  • Can be used immediately; no programming needed
  • Output stages are protected against switch-off peaks
Supply Demand signal Reference voltage
I min. I max. Data sheet
12…30 V DC 2,5…4,5 V 5 V ... 150 mA
10 V ... 150 mA
0,2 ... 2,5 A 0,8 ... 2,5 A EBM-300308_100-P-000146-en

Multi-function Card ESSK 107

  • With three power outputs, two programmable analogue/ digital inputs, one purely digital input and one current measurement input for current control
  • To drive one proportional valve and one on/off solenoid
Supply Set value Output Adjustment Diagnosis Data sheet
12…30 V DC 2 x 0…9 V
1 digital input
prop. 2500 mA
on/off 3000 mA
I min, I max,
zero point
LED for each output ESSK107_100-P-700033-en

Multi-function Card EBM-107002

  • Semiconductor output stages
  • 4 prop. power outputs with current measurement; 4 on/off power outputs
  • 2 analogue inputs, voltage or current, switchable; 1 digital input
  • Setup via CAN
Supply Set value Reference voltage
Output Adjustment Diagnosis Enclosure prot.
Data sheet
12…24 V DC 2 x 0…8 V
1 digital input
8V…50 mA PWMi: 3000mA PWM, SW: 3000mA Imin, Imax, Kennlinien, Rampen Nulllage 3 LEDs IP67 EBM-107002_100-P-000229-en

Fan-Drive Controller ESLF 101

  • Fan speed is controlled to match system requirements
  • Any target value for temperature can be set
  • For reversible and non-reversible fan motors
Supply Temperatur input Reference voltage
Temp. sensor Data sheet
12…28 V DC 3 (P1, P2, P3) 8 V DC / 20 mA PTC and NTC ESLF101_100-P-700063-en

Follow us