Proportional Directional Valves, Series LVS18 / LVS22

This range of proportional valves is used to provide load-independent speed control of motors and cylinders. The LVS18 and LVS22 are operating according to the flow sharing principle. Also available with rapid-traverse and floading function

Proportional Directional Valves, Series LVS18 / LVS22
  • Safe volumetric flow control by flow sharing principle, prevents the functional hold-up caused by undersupply.
  • Load-independent flow control, even with parallel operation of several acuators
  • Load feedback
  • Actuator sections with individual pressure compensators
  • Secondary pressure relief valves
  • LS pressure relief for the whole control block
  • With rapid-traverse and floating position
  • Energy saving by low pressure drop
Type Nominal flow rate, max.
l/min
Acutator flow rate, max.
l/min
Max. inlet pressure (P)
bar
Max. work port press.
bar
Tank line pressure, max.
bar
Voltage
V DC
LVS18 400 260 (∆p=12bar) 370 420 50 12 / 24
LVS 22 600 380 (∆p=14bar) 370 420 50 12 / 24
  Type File extension Size
LVS18_301-FL-900005-en Flyer PDF 2.1 MB
LVS18_301-P-9050090-en Catalog / Data sheet PDF 604.6 KB
LVS 22_301-P-9050093-en Catalog / Data sheet PDF 621.4 KB

(Types of operator)

  • Electrohydraulic, proportional
  • Hydraulic
  • Manual (oil-tight enclosure)
  • Electrohydraulic proportional – manual, combined
  • Electrohydraulic proportional – hydraulic, combined
  • Onboard electronics
  • Mobile cranes
  • Ground drilling rigs
  • Container forklifts
  • Excavators
  • Wheel loaders
  • Telehandlers